Amber Glass Vials
Amber Glass Vials offer light senstive products protection from harmful light and UV rays. These general purpose amber glass vials are made of Type I Borosilicate glass, which provide exceptional resistance to heat shock and chemical leaching.
 |
|
Amber Borosilicate Vial, Vial Only
Closures sold separately. |
| |
| Price: $79.20 |
 |
|
|
| |
|
|
|
|
|
|
Amber Borosilicate Vial with White Graduation Spot
Closures sold separately. |
| |
| Price: $166.63 |
|
|
|
| |
|
|
|
|
|
|
Amber Borosilicate Glass Vial with Black Phenolic Rubber Lined Caps
The attached black phenolic (thermoset) rubber lined caps are autoclavable and compliant with FDA 21 CFR 177.2600 Rubber Articles Intended for Repeated Use. The liner exhibits good resiliency and resistance to moisture vapor. |
| |
| Price: $85.02 |
|
|
|
| |
|
|
|
|
|
|
Amber Borosilicate Glass Vial with Black Phenolic Pulp/Vinyl Lined Caps
The attached black phenolic (thermoset) caps with pulp/vinyl liners are perfect for general use. The liner is made of a vinyl coating applied to high density polyethylene coated paper which is then it is laminated to pulpboard. This general purpose pulp/vinyl liner is commonly used for food, beverage, medical and chemical applications packed at less than 120° F., including mild acids, alkalis, solvents, alcohols, oils and aqueous products; not recommended for active hydrocarbons or bleaches. |
| |
| Price: $110.73 |
|
|
|
| |
|
|
|
|
|
|
Amber Borosilicate Glass Vial with Black Phenolic Polyseal™ Cone Lined Caps
The attached black phenolic (thermoset) caps with Polyseal™ cone liners form an exceptionally tight seal to serve as a chemical barrier. This Polyseal™ cone liner molds itself around the finish as the cap is screwed on, virtually eliminating leakage, evaporation, contamination, binding and backing off. These caps have a wide range of uses; from liquids, to soaps, to macro-invertebrates. |
| |
| Price: $128.60 |
|
|
|
| |
|
|
|
|
|
|
Amber Borosilicate Vial with Green Thermoset F217 Teflon® Lined Cap
The attached green thermoset (phenolic) caps are known for having the widest range of chemical compatibility and temperature tolerance for plastic closures. The PTFE liner system is identified by the green color. Foam backed PTFE liners resist attack from virtually all chemicals at room temperature and provides a tight seal with a low moisture transmission rate. F217 has a low density foam core between two solid layers of LDPE. Used to store strong acid solvents, analytical lab samples, environmental samples, pharmaceuticals, high purity samples, and diagnostic reagents. |
| |
| Price: $131.48 |
|
|
|
| |
|
|
|
|
|
|
Amber Borosilicate Vial, White PP Hole Cap & Teflon® PTFE/Silicone Septa, Pre-preserved with HCL
The attached white polypropylene hole caps provide the widest range of chemical compatibility as well as temperature tolerance of plastic closures. The PTFE/Silicone septa resists coring, has great resealing qualities, and is recommended for protocols requiring multiple injections. |
| |
| Price: $62.88 |
|
|
|
| |
|
|
|
|
|
|
Amber Borosilicate Vial with Green PP Hole Cap & Teflon® PTFE/Silicone Septa
The attached green polypropylene hole caps provide the widest range of chemical compatibility as well as temperature tolerance of plastic closures. The PTFE/Silicone septa resists coring, has great resealing qualities, and is recommended for protocols requiring multiple injections. |
| |
| Price: $178.46 |
|
|
|
| |
|
|
|
|
|
|
Amber Borosilicate Vial with Black PP Cap & Teflon® Disc
The attached polypropylene caps are known for their good impact strength, cost effectiveness and pliability. The Teflon® discs converts the caps into non-contaminating closures at a fraction of the cost. Easy to clean, remove, and replace. |
| |
| Price: $183.85 |
|
|
|
| |
|
|
|
|